冷再生機其實就是用來對我們的路面進行銑刨工作的•▩╃·◕，同時還可以新增瀝青•▩╃·◕，它的工作效率是非常高的•▩╃·◕，可以給我們節省很多的勞動時間的▩│₪↟│。那麼您知道冷再生機出租的優點是什麼嗎₪│✘？

In fact, the cold recycling machine is used for milling our pavement and adding asphalt. Its work efficiency is very high, which can save us a lot of labor time. Do you know the advantages of renting cold regenerator?

1•╃◕▩、簡化施工程式▩│₪↟│。利用銑削刨削加工的冷再生裝置•▩╃·◕，對舊路面材料進行銑削加工•▩╃·◕，直接將用於銑刨和刨削的廢料混合•▩╃·◕，直接在混合室中傳播▩│₪↟│。建築程式簡化▩│₪↟│。

1. Simplify construction procedures. Use the cold recycling equipment for milling and planing to mill the old pavement materials, directly mix the waste materials used for milling and planing, and spread them directly in the mixing chamber. Simplify construction procedures.

2•╃◕▩、防止因道路施工造成交通阻塞▩│₪↟│。因為冷凝器省去了施工過程中的運輸和攪拌工序•▩╃·◕，所以現場投資相對較少▩│₪↟│。這樣可以有效地降低道路建設帶來的交通負荷▩│₪↟│。因為冷熱交換器在施工側施工•▩╃·◕，所以可選擇一半施工•▩╃·◕，一半道路維修•▩╃·◕，使道路能夠修復•▩╃·◕，不影響正常使用的交通▩│₪↟│。

2. Prevent traffic jam caused by road construction. Because the transportation and mixing procedures in the construction process are omitted from the condenser, the on-site investment is relatively small. This can effectively reduce the traffic load brought by road construction. Because the cold and heat exchanger is constructed on the construction side, half of the construction and half of the road maintenance can be selected, so that the road can be repaired without affecting the normal use of traffic.

3•╃◕▩、施工效率高▩│₪↟│。在傳統的路面施工工藝中•▩╃·◕，採用銑刨機銑削舊路面•▩╃·◕，然後將其輸送到攪拌站進行混合▩│₪↟│。隨後•▩╃·◕，將其運回施工現場•▩╃·◕，並用攤鋪機展開•▩╃·◕，輥子由輥子捲成▩│₪↟│。而且區域性冷回熱器在施工過程中屬於一種成型(即將銑刨•╃◕▩、拌和•╃◕▩、攤鋪在冷再經過一次需要修補的路面後依次完成)•▩╃·◕，它可以隨著施工進度的進行而開啟道路竣工▩│₪↟│。這能大大減少維護路面和提前開通交通所需的時間▩│₪↟│。

3. High construction efficiency. In the traditional pavement construction process, the old pavement is milled by a milling machine, and then transported to the mixing plant for mixing. Then, it is transported back to the construction site and spread with a paver. The rollers are rolled up by rollers. In addition, the local cold regenerator belongs to a kind of molding during the construction process (that is, milling, mixing, and paving are completed in turn after the cold pavement needs to be repaired again). It can open the road and complete the construction as the construction progress progresses. This can greatly reduce the time required to maintain the road surface and open the traffic in advance.

4•╃◕▩、環保•╃◕▩、節能▩│₪↟│。因為冷再生機經過銑刨機後•▩╃·◕，幾乎所有的廢品都可直接送到混合腔中並就地攤鋪利用•▩╃·◕，減少新石料等材料的開採•▩╃·◕，無需考慮運輸和堆垛問題▩│₪↟│。報廢材料▩│₪↟│。大大的節省資源和保護環境▩│₪↟│。冷再生過程不需要加熱或攪拌物料•▩╃·◕，節約了大量的能量▩│₪↟│。冷再生再生料是一種回收廢舊路面材料的裝置▩│₪↟│。無汙染•▩╃·◕，故稱其為綠色建築技術▩│₪↟│。

4. Environmental protection and energy conservation. Because after the cold recycling machine passes through the milling machine, almost all the waste products can be directly sent to the mixing chamber and spread on the ground for utilization, reducing the mining of new stone and other materials, without considering the transportation and stacking problems. Scrap materials. Greatly save resources and protect the environment. The cold regeneration process does not need to heat or stir materials, saving a lot of energy. Cold recycled material is a kind of equipment for recycling waste pavement materials. No pollution, so it is called green building technology.

5•╃◕▩、降低建設費用▩│₪↟│。冷凝法與傳統施工方法相比•▩╃·◕，可節省大量的裝置•╃◕▩、人員•╃◕▩、材料等•▩╃·◕，且相對成本低▩│₪↟│。

5. Reduce construction costs. Compared with the traditional construction method, the condensation method can save a lot of equipment, personnel, materials, and the relative cost is low.

以上就是關於冷再生機出租的優點•▩╃·◕，希望小編的文章可以給到大家一些幫助以及參考的價值▩│₪↟│。如果有需要租賃冷再生機的客戶可以直接與我們的公司http://www.soundaffectsdc.com進行聯絡和諮詢▩│₪↟│。

The above is about the advantages of cold recycling machine rental. I hope that the article can give you some help and reference value. Customers who need to rent cold regenerators can contact our company directly http://www.soundaffectsdc.com Contact and consult.